|
Search other suppliers in the following categories:
|
|
DC power supplies accept an input power and output the desired form of DC power. Common types of DC power supplies include linear power supplies, switching power supplies, DC-DC converters, and silicon controlled rectifier (SCR) type power supplies.
|
|
Electric rotary actuators drive components rotationally via electromagnetic power. They typically have control and indexing capabilities.
|
|
Electrical feedthroughs transmit electrical current through the walls of a pressurized or vacuum system through a hermetic seal.
|
|
Feedthroughs transmit electrical current, fluids, optical signals, or mechanical motion through the walls of a pressurized or vacuum system through a hermetic seal.
|
|
Fluid feedthroughs use a hermetic seal to transmit fluids through the walls of a pressurized or vacuum system. Devices include nitrogen, air, and water feedthroughs.
|
|
Gaskets are used to prevent fluid or gas leaks by providing a barrier between two mating surfaces.
|
|
High and ultrahigh vacuum pumps operate efficiently in the high vacuum region and develop molecular flow for highly evacuated systems.
|
|
Electric linear actuators have an output rod that provides linear motion via a motor driven ball screw, lead screw, or ACME screw assembly. The actuator's load is attached to the end of a screw or rod and is often unsupported.
|
|
Linear slides are simple linear motion devices composed of a stationary base and a moving carriage. Linear stages are slides with a drive mechanism that provide controlled, precise positioning along a linear axis.
|
|
Mechanical feedthroughs transmit mechanical motion through the walls of a vacuum system. Both linear and rotary feedthroughs are included in this grouping.
|
|
Mechanical vacuum pumps and systems contain devices such as pistons, claws, scrolling spirals, and diaphragms to isolate and compress air.
|
|
Metal ring seals are static devices that can withstand high operating temperatures, pressures, and vacuums. They can also withstand cryogenic conditions and high face-to-face cycling.
|
|
Plasma power supplies are DC and RF devices used in plasma generation equipment for applications such as sputtering, plasma etching, physical vapor deposition (PVD) coating, and chemical vapor deposition (CVD) coating.
|
|
Power supplies are devices that produce AC or DC power. This grouping includes current sources, DC power supplies, AC-DC adapters, DC-DC converters, AC power sources, and DC-AC inverters.
|
|
Pressure gauges are used for a variety of industrial and application-specific pressure monitoring applications. Uses include visual monitoring of air and gas pressure for compressors, vacuum equipment, process lines and specialty tank applications such as medical gas cylinders and fire extinguishers.
|
|
Residual gas analyzers (Rags) identify the gases present in vacuum environments.
|
|
RF generators and high frequency power supplies provide the power required for plasma generation, induction heating, and radar or communications applications.
|
|
Specialty or proprietary products and accessories related to spectrometers.
|
|
Spectrometers are analytical instruments which disperse an emission (such as particles or radiation) according to some property of the emission (such as mass or energy) in order to measure the amount of the dispersion. This product area includes visible, infrared (IR), ultraviolet (UV), atomic absorption (AA), optical emission (OE), Raman, X-ray fluorescence (XRF) and mass spectrometers. Specific search forms are also available.
|
|
Thin film sources consist of magnetrons, evaporation thermal units, ion beams and other sources that produce deposition materials (vapors or ions) in a thin film system.
|
|
Vacuum chambers and components are specialized vessels that can maintain a high vacuum process environment for manufacturing thin films, microelectronics, optics and materials.
|
|
Vacuum flanges and fittings connect runs of pipe and tubing in vacuum or process gas system to other tubing sections, pipe, hose, valves, pumps, chambers or other vacuum components.
|
|
Vacuum gauges are devices for measuring vacuum or sub-atmospheric pressures.
|
|
Vacuum manipulators include components for moving or positioning wafers or items in vacuum chambers or systems such as mounting devices, load locks, wobble sticks or wafer robots.
|
|
Vacuum pumps and vacuum generators provide sub-atmospheric pressure for a variety of industrial and scientific applications where a vacuum is required.
|
|
Vacuum traps, getters and filters are used to remove tramp gases with a cooled surface, molecular sieve, filtration, or other processes.
|
|
Vacuum valves are used when a vacuum must be maintained in a closed system.
|
|
Vacuum viewports and access doors are components for viewing, accessing or transferring samples or process devices in a vacuum chamber or system.
|
