|
Search other suppliers in the following categories:
|
|
Air pressure regulators control pressure in air lines (usually adjustable) to remove fluctuations and maintain consistent pressure for pneumatic devices.
|
|
Analog pressure gauges are mechanical devices that include bellows, Bourdon tubes, capsule elements and diaphragm element gauges.
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.
|
|
Control valves or proportional valves are power-operated devices used to modify fluid flow or pressure rate in a process system.
|
|
Single component diaphragm valves are designed to provide a precise fluid supply depending on the application. The dispensed output can be a bead, dot or fill
|
|
Precision dispensing needle valves are designed to provide precise fluid dispensing depending on applications. The dispensed output can be in the form of a bead, dot or fill. The valve dispenses fluid when the activator (for example, air) acts on a piston, which shifts the spool or needle into the open position.
|
|
Precision dispensing valves are designed to provide precise fluid dispensing depending on applications. The dispensed output can be a bead, dot, flat spray, round spray, or fill (potting). The type of dispensing pattern from precision dispensing valves is determined by valve design and is dependent on dispensed fluid properties.
|
|
Filler metal alloys and consumables used in welding, brazing or soldering include items in rod sheet, wire spool, coated stick, weld stud, powder, preform or paste forms.
|
|
Gas pressure regulators reduce the pressure of a gas, as it passes through a cylinder or process line, to another piece of equipment. Regulators are not flow control devices. They are used to control delivery pressure only.
|
|
Globe valves are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service.
|
|
Hose fittings are a category of components used to connect hoses and tubes for in-line, offset, multi-port, and mounting configurations.
|
|
Industrial fluids are used for heat transfer, lubrication, power transmission and other specialized applications.
|
|
Hand tools such as screwdrivers, wrenches, and hammers, used for assembly, installation, repair and maintenance of machines and systems.
|
|
Industrial hose covers the broad spectrum of fluid transfer lines. Hose is usually flexible, often reinforced, and available in a wide range of material compositions to cover various hydraulic and pneumatic industrial applications.
|
|
Industrial sealants are liquid or viscous compounds used between surfaces to contain fluids, prevent leaks, and prevent infiltration of unwanted material. They may also include compounds for filling gaps or seams.
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Laser cutting machines, laser welding machines and laser marking systems use high-powered lasers to cut, trim, perforate, weld, or join a variety of materials in plate or sheet form.
|
|
Liquid leak detectors sense when a liquid is leaking from a pipe, tank, or other receptacle area.
|
|
Manifolds and manifold systems are fluid-distribution devices. They range from simple supply chambers with several outlets to multi-chambered flow control units including integral valves and interfaces to electronic networks.
|
|
Needle valves are small valves used for flow control in liquid or gas services. The fine threading of the stem and the large seat area allow for precise resistance to flow.
|
|
Pipe fittings include many components that connect pipe ends for in-line, offset, multi-port, and mounting configurations.
|
|
Plastic valves are made from plastic materials and are used in applications that require corrosion resistance and/or chemical handling.
|
|
Quarter-turn plug valves use a cylindrical or tapered plug with a hole in the center to control straight through flow when in the open position.
|
|
Pressure gauges are used for a variety of industrial and application-specific pressure monitoring applications. Uses include visual monitoring of air and gas pressure for compressors, vacuum equipment, process lines and specialty tank applications such as medical gas cylinders and fire extinguishers.
|
|
Pressure relief valves are self-actuated safety valves designed to relieve excess pressure upstream from the line.
|
|
Quick couplers are used in hydraulic or pneumatic systems to quickly connect lines without losing fluid or fluid pressure.
|
|
Resins and compounds are pellets, liquid resins, bulk molding compounds, or other unfinished materials that are ready for shape fabrication or bond formation.
|
|
Sanitary valves are designed for applications requiring clean or sterile processing.
|
|
Sealing glands are used to secure instrumentation wire and tubing, providing entry into pressurized, vacuum, or hazardous chambers and environments.
|
|
Specialty or proprietary products and accessories related to pipes, tubes, hoses, and fittings.
|
|
Tube fittings connect runs of tubing for in-line, offset, multi-port, and mounting configurations to other tubing sections, pipe, hose, and other fluid transfer components.
|
|
Tubing is used to transport fluid and gas in pneumatic, hydraulic, or process applications. Tubing differs from pipe in that tubing's outside diameter or size is controlled and used for product designation.
|
|
Vacuum flanges and fittings connect runs of pipe and tubing in vacuum or process gas system to other tubing sections, pipe, hose, valves, pumps, chambers or other vacuum components.
|
|
Welding accessories includes products used in, or related to, processes such as MIG, TIG and resistance.
|
|
Welding alloys are used to melt and fuse pieces of metal together.
|
|
Wire and cable harness accessories are used to bundle, clip, clamp, label, guide, and protect wires and cables.
|
Print
Forward
Save to My Suppliers