|
Search other suppliers in the following categories:
|
|
AC-DC adapters accept AC input voltage directly from a wall outlet, and output DC voltage.
|
|
Aluminum electrolytic capacitors use an electrolytic process to form the dielectric. Wet electrolytic capacitors have a moist electrolyte. Dry or solid electrolytic capacitors do not.
|
|
Amplifier and comparator chips are board-level components for amplifying voltage, current, or power.
|
|
Antennas are structures or devices used to collect or radiate electromagnetic waves.
|
|
Audio connectors are used to affix cables to other audio equipment, providing electronic signal transference and grounding protection.
|
|
Audio transducers and buzzers are used in electronic equipment, toys and various warning devices as the sounding component.
|
|
Battery holders are designed to support commercial, industrial or OEM batteries.
|
|
Capacitors are electronic components used for storing charge and energy. In their simplest form, capacitors consist of two conducting plates separated by an insulating material called the dielectric.
|
|
Circuit protection devices are used to protect electronic components from unwanted transients such as current and voltage surges, electrostatic discharge (ESD), lightning, spikes and other signals that can imperil the operation or damage the component.
|
|
Coaxial connectors are composed of an insulated central conducting wire wrapped in another cylindrical conductor (the shield). The cable is usually wrapped in another insulating layer and an outer protective layer. Coaxial cables and connectors have the capacity to carry vast quantities of information. They are typically used in high-speed data and CATV applications.
|
|
Computer board and card edge connectors are used inside personal computers to connect disk drives, CD drives, and serial and parallel ports to the motherboard.
|
|
DC-DC converters accept DC input and provide regulated and/or isolated DC output in various applications including computer flash memory, telecommunications equipment, and process control systems.
|
|
Digital multimeters (or multi-meters) are used to measure electrical quantities such as voltage, current, resistance, frequency, temperature, capacitance, and time period measurements.
|
|
Diodes are electronic components that conduct electric current in only one direction, functioning as a one-way valve. Diodes are manufactured using semiconductor materials such as silicon, germanium or selenium and are used as voltage regulators, signal rectifiers, oscillators and signal modulators / demodulators.
|
|
Edge card connectors are edge-on connectors designed for single-sided or double-sided printed circuit boards (PCBs).
|
|
Electrically erasable programmable read-only memory (EEPROM) chips are similar to PROM devices, but require only electricity to be erased.
|
|
Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.
|
|
Electronic cooling fans move air to cool electronic devices.
|
|
Ferrite beads are used to suppress unwanted signals that can interfere with electrical devices such as DC supplies, transmission lines and cables. They provide attenuation of selected frequency bands.
|
|
Fuse holders are devices for containing, protecting and mounting fuses. Blown fuses can be changed quickly and easily when used in conjunction with a fuse holder.
|
|
Fuses protect electrical devices and components from overcurrents and short circuits that occur in improperly operating circuits.
|
|
Hookup wires are used in low current, low voltage (under 1000 V) applications within enclosed electronic equipment. They are also used in control panels, meters, computers, business machines, and appliances.
|
|
Integrated circuit (IC) linear voltage regulators use voltage-controlled sources to force a fixed voltage to appear at their output terminal.
|
|
IC sockets and interconnect components interface or connect a microelectronic semiconductor chip to a board or larger scale device.
|
|
IC switching voltage regulators are integrated circuits (ICs) that store energy in an inductor, transformer, or capacitor and then use this storage device to transfer energy from the input to the output in discrete packets over a low-resistance switch.
|
|
IC voltage regulators are three-terminal devices that provide a constant DC output voltage that is independent of the input voltage, output load current, and temperature. IC voltage regulators are used in power supplies that hold their output voltage constant over a wide range of load variations.
|
|
Inductors, coils, and chokes are passive components designed to resist changes in current and store energy in the form of a magnetic field.
|
|
Industrial batteries translate chemical energy into electricity.
|
|
Industrial cooling systems and equipment includes air-to-air, liquid-to-air, and liquid-to-liquid heat exchangers; ducts and/or pipes; and other devices for removing heat from a system that contains a heat source.
|
|
Industrial enclosures are used to house electronic components, equipment and devices. They are designed to protect personnel from accidental injury and to prevent the ingress of environmental contaminants.
|
|
Industrial fans and industrial blowers and commercial fans and blowers are designed to move air and/or powders in industrial and commercial settings. Typical applications include air circulation for personnel, exhaust or material handling.
|
|
Logic gates are electronic circuits that combine digital signals according to boolean algebra.
|
|
Memory chips are internal storage areas in computers. Although the term “memory chip” commonly refers to a computer's random access memory (RAM), this product area includes many different types of electronic data storage. Computer memory stores data electronically in cells. Without memory chips, a computer could not read programs or retain data.
|
|
Microcontrollers (MCU) are complete computer systems on a chip. They combine an arithmetic logic unit (ALU), memory, timer/counters, serial port, input/output (I/O) ports and a clock oscillator.
|
|
Operational amplifiers (op amps, op-amps) are general-purpose, closed-loop devices that are used to implement linear functions.
|
|
PC card connectors are used to connect computer cards to computers. Examples include PC cards and CompactFlash cards.
|
|
PC enclosures are designed to protect personal computers (PCs) in industrial or office environments. They are designed to prevent the ingress of environmental contaminants such as dust and water and can be used to integrate a monitor, central processing unit (CPU), keyboard, and printer into one cabinet.
|
|
PCB pins and PCB receptacles are electronic interconnect devices for printed circuit boards (PCB). PCB pins are male connectors. PCB receptacles are female connectors.
|
|
PCB terminal blocks are modular, insulated devices that mount on printed circuit boards (PCBs) and secure two or more wires together. Some have integral pin terminals and mount through holes in the board. Others plug into PCB-mounted pin strips.
|
|
Phone jacks and plugs are connectors used with telephones. They are also known as modular jacks (female) and modular plugs (male).
|
|
Plugs, stoppers and inserts fit into holes or cavities and are designed for the ends of shafts, tubes, pipes, fittings, connectors, screws, bars, or other shapes.
|
|
Potentiometers, rheostats and trimmers are three-terminal resistors that are used to measure or divide voltages, and to protect or control circuits.
|
|
Power connectors transfer AC or DC through a variety of electronic devices and are used in a variety of commercial, industrial, and residential applications. Power connectors range from simple AC or DC inlets and outlets to sophisticated power entry modules
|
|
Power entry modules are composed of a connector and a mounting case with features to produce the highly conditioned output necessary for medical or sensitive instrumentation.
|
|
Power supplies are devices that produce AC or DC power. This grouping includes current sources, DC power supplies, AC-DC adapters, DC-DC converters, AC power sources, and DC-AC inverters.
|
|
Rectifier diodes are designed for use in rectification circuits. Rectifiers are used to convert AC to DC.
|
|
Resistors are electrical components that oppose the flow of either direct or alternating current. They are used to protect, operate, or control circuits.
|
|
Resistors and potentiometers are passive electronic components that oppose the flow of either alternating current (AC) or direct current (DC).
|
|
Silicon controlled rectifiers (SCR) are four-layer (PNPN) thyristors with three terminals: an input control terminal (gate), an output terminal (anode), and a terminal common to both the input and output (cathode). SCRs are used mainly with high voltages and currents, often to control alternating current (AC) where the change of sign causes the device to switch off automatically.
|
|
Specialty or proprietary products and accessories related to cabinets, racks and enclosures.
|
|
Tantalum capacitors are used in smaller electronic devices including portable telephones, pagers, personal computers, and automotive electronics.
|
|
Thyristors are a class of four-layer (PNPN) semiconductor devices that act as switches, rectifiers, or voltage regulators.
|
|
Transistors are electronic devices made of semiconductor material that amplify a signal or open or close a circuit.
|
|
Triacs are three-terminal silicon devices that are configured in an inverse parallel arrangement to provide load current during both halves of the AC supply voltage. They are often used to control motor speed.
|
|
Voltage references are electronic circuits that produce a constant output voltage (reference) that is used to compare other voltages in a system.
|
|
Zener diodes are PN junction devices that are designed to operate in the reverse-breakdown region.
|
Print
Forward
Save to My Suppliers