|
|
| |
Heater Type
|
|
|
| |
Your choices are...
|
|
|
| |
Air Heater
|
|
Air heaters are used to heat air. This category includes forced air products and all types of radiant and space heaters.
|
| |
Band Heater
|
|
Band heaters are ring-shaped heaters that clamp onto a cylindrical object and heat via conductive heat transfer.
|
| |
Coil Heater and Cable Heater
|
|
Coil heaters and cable heaters are heating elements formed from straight (uncoiled) segments of round or square heating cable.
|
| |
Cartridge Heater
|
|
Cartridge heaters are cylindrical heaters that are inserted into a heated substance.
|
| |
Cast-In Heater
|
|
Cast-in heaters are made-to-order tubular or wire heaters that are cast into a part. These parts are designed to be an integral component of a larger piece of equipment.
|
| |
Ceramic Fiber Heater
|
|
Ceramic fiber heaters are only used for radiant heat transfer. They are not designed for conduction heating applications.
|
| |
Circulation Heater
|
|
Circulation heaters are used to heat moving or circulating fluids.
|
| |
Drum Heater
|
|
Drum heaters are used to heat cylindrical containers of viscous materials. They either clamp onto the outside diameter of the drum, or are inserted directly into the material to be heated within the drum.
|
| |
Duct Heater
|
|
Duct heaters are used to heat streams of moving gas.
|
| |
Enclosure Heater
|
|
Enclosure heaters are designed for use within enclosures. They prevent freezing and provide protection and humidity control.
|
| |
Flexible Heater
|
|
Flexible heaters can be molded to the shape of a heated object.
|
| |
Forced Air Heater
|
|
Forced air heaters use forced convection to move air past a heat source with a fan or blower.
|
| |
Heat Torch
|
|
Heat torches are forced-process air heaters. They are used in applications that require modest amounts of focused air.
|
| |
Immersion Heater
|
|
Immersion heaters are used in applications where it is necessary to immerse a heater in the substance being heated. Flange and screw-plug varieties are easy to use and quick to install.
|
| |
Induction Heater
|
|
Induction heaters use an electrical source to drive alternating current (AC) through a coil to heat metal objects.
|
| |
Infrared Heater
|
|
Infrared heaters use current flowing through resistive elements to produce electromagnetic waves in the infrared (IR) spectrum. These waves may be reflected onto the material to be heated, or may use a panel to evenly distribute the heating waves. The IR waves heat the object or material in the path. Note that the object is heated directly by the IR waves instead of the surrounding air.
|
| |
Over-the-Side Heater
|
|
Over-the-side heaters are immersion heaters that hang over the side of a tank of heated material.
|
| |
Radiant Flat Panel Heater
|
|
Radiant flat panel heaters are used to heat objects via radiant heat transfer.
|
| |
Radiant Reflective Process Heater
|
|
Radiant heaters use a reflective shield to direct radiant heat onto a heated surface.
|
| |
Radiant Heater Element
|
|
Radiant heater elements are used with radiant flat panel and radiant reflective heaters.
|
| |
Radiator
|
|
Radiators have coils that contain heated, circulated media such as oil, hot water, or steam.
|
| |
Room / Space Heater
|
|
Room and space heaters are used to heat rooms, garages, and other areas that workers use.
|
| |
Steam Injection Heater
|
|
Steam injection heaters inject steam into a system to maintain or raise temperature levels.
|
| |
Strip Heater
|
|
Strip heaters are flat heaters that can be bolted, clamped or stuck to a solid surface for freeze protection, humidity control, food warming and other applications. They are available in both plain and finned designs.
|
| |
Tubular Heater
|
|
Tubular heaters are used in custom heating applications. Base (tubular) heating elements can be bent into standard or custom shapes.
|
| |
Water Heater
|
|
Water heaters are gas, oil or electric-fired devices that heat water for residential and commercial use.
|
| |
Specialty / Other
|
|
Other unlisted, specialized, or proprietary heaters.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Electric
|
|
Electricity is the primary power source.
|
| |
Diesel / Fuel Oil / Gasoline / Kerosene
|
|
The primary power source burns or generates power from fuel oil, diesel, gasoline, or kerosene.
|
| |
Hot Water / Steam
|
|
Circulating steam or hot water is the primary heat source.
|
| |
Natural Gas / Propane
|
|
Natural gas or propane is the primary power source.
|
| |
Solar
|
|
The primary power source captures and uses solar heat.
|
| |
Wood / Pellet
|
|
The primary power source burns wood, wood pellets, or other combustible solid products.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary fuel or energy sources.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Maximum Operating Temperature
|
|
Maximum operating (sheath) temperature is the highest temperature that the heater's sheath (or protective cover) may reach. This is not the maximum temperature a heated substance may reach.
|
| |
Search Logic:
|
|
All matching products will have a value greater than or equal to the specified value.
|
|
|
|
| |
Maximum Air Flow
|
|
The maximum flow of air through the heater.
|
| |
Search Logic:
|
|
All matching products will have a value greater than or equal to the specified value.
|
|
|
|
| |
Heating Capacity
|
|
Heating capacity is the wattage which the heater can deliver.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
|
|
| |
Phase:
|
|
|
| |
Your choices are...
|
|
|
| |
Single Phase
|
|
Heaters use single-phase power.
|
| |
Three Phase
|
|
Heaters use three-phase power.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
AC Voltage Required
|
|
Heaters require AC voltage. Most heaters use AC voltage instead of DC voltage.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Watt Density
|
|
The maximum watt density that the heater can deliver. Watt density is a good measure of how quickly the heater can transfer heat to a heated surface. To calculate watt density, suppliers divide the available wattage by the heated surface area.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
|
|
| |
Sleeve (Sheath) Material
|
|
Most heaters have a protective sheath or sleeve that covers the heating elements. There are usually many choices for sheath or sleeve material.
|
| |
Your choices are...
|
|
|
| |
None
|
|
The heater has a bare, exposed heating element without a sleeve or sheath.
|
| |
Aluminum
|
|
The sleeve or sheath is made of aluminum, a bluish, silver-white, malleable, ductile, light, trivalent, metallic element that provides good electrical and thermal conductivity, high reflectivity, and resistance to oxidation.
|
| |
Brass
|
|
The sleeve or sheath is made of brass, an alloy that provides good strength, excellent high temperature ductility, reasonable cold ductility, good electrical conductivity, excellent corrosion resistance, and low magnetic permeability.
|
| |
Copper
|
|
The sleeve or sheath is made of copper, a common, reddish, metallic element that is ductile and malleable. Copper is one of the best conductors of heat and electricity.
|
| |
Fluoropolymer (Teflon®)
|
|
The sleeve or sheath is made of a fluropolymer such as Teflon® (DuPont Dow Elastomers). Teflon refers to a class of fluoropolymer resins used for a wide variety of commercial applications. They are highly-resistant to temperature, chemical reaction, corrosion, and stress-cracking.
|
| |
HT Foil (Ceramic Foil)
|
|
The sleeve or sheath is made of high temperature (HT) foil. HT foil is sometimes called ceramic foil.
|
| |
Iron
|
|
The sleeve or sheath is made of iron.
|
| |
Nickel Alloy (Inconel®, Incoloy®, Monel®)
|
|
The sleeve or sheath is made of nickel alloy. The amount of nickel varies by alloy type. Proprietary alloys include Inconel®, Monel® (Special Metals Corporation) and Incoloy® (Inco Alloys International).
|
| |
Polyimide (Kapton®)
|
|
The sleeve or sheath is made of a polyimide such as Kapton® (DuPont).
|
| |
Rubber
|
|
The sleeve or sheath is made of natural or synthetic rubber, silicone, or styrene butadiene (SBR).
|
| |
Stainless Steel
|
|
The sleeve or sheath is made of stainless steel, a chemical and corrosion resistant alloy that can have relatively high-pressure ratings.
|
| |
Steel
|
|
The sleeve or sheath is made of steel, a commercial iron that contains carbon in any amount up to about 1.7% as an essential alloying constituent. Steel is malleable under suitable conditions and distinguished from cast iron by its malleability and lower carbon content.
|
| |
Synthetic Rubber (Neoprene)
|
|
The sleeve or sheath is made of a synthetic rubber such as neoprene.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary sleeve or sheath materials.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Applications
|
|
|
| |
Your choices are...
|
|
|
| |
Annealing / Heat Treating
|
|
Process annealing is used to treat work-hardened parts made from low-carbon steels (< 0.25% carbon). Annealing can be used to stress-relieve or fully soften a part. A full anneal allows the parts to be soft enough to undergo further cold working without fracturing.
|
| |
Curing / Tempering
|
|
Heaters are designed for curing or tempering applications. They can heat adhesive bonds to curing or setting specifications.
|
| |
Drying
|
|
Heaters are used to dry products or materials with in-process or batch operation.
|
| |
Melting
|
|
Heaters are used to transform materials from a solid to a liquid state for further processing (e.g., casting).
|
| |
OEM / Custom
|
|
Heaters are designed as OEM modules and are designed to be embedded or installed in another piece of equipment.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary applications.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
RoHS Compliant
|
|
Restriction of Hazardous Substances (RoHS) is a European Union (EU) directive that requires all manufacturers of electronic and electrical equipment sold in Europe to demonstrate that their products contain only minimal levels of the following hazardous substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl and polybrominated diphenyl ether. RoHS will become effective on July 1, 2006.
|
| |
Search Logic:
|
|
"Required" and "Must Not Have" criteria limit returned
matches as specified. Products with optional attributes
will be returned for either choice.
|
|
| |
WEEE Compliant
|
|
Waste Electrical and Electronics Equipment (WEEE) is a European Union (EU) directive designed to encourage the reuse, recycling and recovery of electrical and electronic equipment. WEEE is also designed to improve the environmental impact and performance of this equipment. The WEEE directive establishes requirements and criteria for the collection, treatment, recycling and recovery of electrical and electronic equipment. It also makes producers responsible for financing these activities. Retailers and distributors must provide a way for consumers to return used or obsolete equipment without charge.
|
| |
Search Logic:
|
|
"Required" and "Must Not Have" criteria limit returned
matches as specified. Products with optional attributes
will be returned for either choice.
|
|
|
|
| |
Features
|
|
|
| |
Your choices are...
|
|
|
| |
Corrosion Resistant
|
|
The heater is made of corrosion-resistant materials and suitable for use in a corrosive or chemical environment.
|
| |
Cryogenic Use
|
|
The heater may be used in a cryogenic environment.
|
| |
Custom Design
|
|
The heater can be custom-designed and configured. Custom designs are configured in coordination with the manufacturer.
|
| |
Dynamic Power Regulation
|
|
Dynamic power regulation regulates the power output from the heater so that parts are heated at the proper rate.
|
| |
Explosion-Proof
|
|
The heater's housing is designed to withstand explosions and protect the materials within. Some suppliers include heaters with housings that can withstand sparking and flames.
|
| |
Encased Coil
|
|
The coil is encased in a casting for protection and to maximize heat transfer.
|
| |
Finned
|
|
The heater has fins for better heat dissipation.
|
| |
Grounding Wire
|
|
The heater is equipped with a grounding wire.
|
| |
Hazardous Location
|
|
Hazardous location heaters are designed for use in places where there is a risk of fire or explosion. Underwriters Laboratories (UL) and other organizations rate these devices.
|
| |
Indirect Fired
|
|
Indirect fired heaters use a secondary heat exchanger to separate the breathable air stream from the combustion air stream.
|
| |
Internal Temperature Detector
|
|
The heater is equipped with an internal temperature detector.
|
| |
Microprocessor Controlled
|
|
The heater is equipped with a microprocessor that controls the voltage applied to the heated object. The microprocessor regulates the temperature of the heated object, as well as the speed at which the object heats.
|
| |
Multiple / Independent Timing Controls
|
|
Heaters have separate, independent controls for multiple functions such as heating, cooling, temperature hold, or other heater parameters.
|
| |
Overheat Protection
|
|
Heaters include an automatic shut-off or other mechanism to prevent overheating of the material.
|
| |
Portable
|
|
Portable heaters are lightweight or have wheels.
|
| |
Thermostat
|
|
Heaters have an integrated, adjustable or preset thermostat.
|
| |
UL Approved
|
|
Heaters are approved by Underwriters Laboratories (UL). Typically, documentation of UL certification is available from the manufacturer.
|
| |
Weatherproof Housing
|
|
The heater's housing is sealed, liquid-proof, and suitable for use in a harsh, outdoor environment.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
Part Numbers for Industrial Heaters
| Part # |
Distributor |
Manufacturer |
Product Category |
Description |
| PHX452 |
PLC Radwell |
AITKEN
|
Not Provided
|
HEATER PORTABLE 15349BTU 240VAC 1PH 18.8AMP |
| PXT200 |
PLC Radwell |
CALORITECH
|
Not Provided
|
HEATER 120V 200W CONTROL PANEL AND PUMP HOUSE |
| SPEC145 |
PLC Radwell |
TEMPCO
|
Not Provided
|
HEATER |
| SPEC998 |
PLC Radwell |
OGDEN
|
Not Provided
|
HEATER |
| STRI7248240V2000 |
PLC Radwell |
CHROMALOX
|
Not Provided
|
HEATER |
| TCU10204 |
PLC Radwell |
RED LION CONTROLS
|
Not Provided
|
HEATER CRNT MNTR W/N 4X, ALRMS AND RS485 |
| 017400 |
PLC Radwell |
STARBOARD TECHNOLOGY
|
Not Provided
|
HEATER |
| 024041 |
PLC Radwell |
DYNISCO
|
Not Provided
|
CART HEATER |
| 0F8336 |
PLC Radwell |
SIEMENS
|
Not Provided
|
GEN BLOCK HEATER 6.8L 150KW |
| 1004805 |
PLC Radwell |
SICK OPTIC ELECTRONIC
|
Not Provided
|
LENS HEATER FOR WS, WE, AND WL 36 MODELS ONLY |
More >>
|
