|
|
| |
Maximum Stroke:
|
|
The maximum distance the shaft travels from fully retracted to fully extended.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Rated Load / Force:
|
|
Note: This is not the maximum static load.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Operating Pressure:
|
|
Full required range of operating pressure.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Bore Size:
|
|
Specify desired bore if unlisted above.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Shaft Diameter:
|
|
Diameter of shafting; largest diameter if there are different diameters.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Operating Temperature:
|
|
The temperature range over which the device must operate.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the limits in a "From - To" range; when both are specified, matching products will cover entire range. Products returned as matches will meet all specified criteria.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Simple Configuration
|
|
A simple cylinder configuration consists of a single rod that can only travel the length of its rod and back.
|
| |
Telescopic Configuration
|
|
A telescopic configuration cylinder uses "telescoping" cylindrical housings to extend the length of the cylinder. Telescopic configuration cylinders are used in a variety of applications that require the use of a long cylinder in a space-constrained environment.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Single Action
|
|
A single action cylinder is pressurized for motion in only one direction. A spring is frequently used to bring the cylinder piston back to the original position.
|
| |
Double Action
|
|
A double action cylinder can move along the horizontal (x-axis) plane, the vertical (y-axis) plane or along any other plane of motion. Both sides of cylinder piston can be pressurized for reversible motion. Force ratings can differ somewhat in opposite directions.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary cylinder actions.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Motor Features
|
|
|
| |
Your choices are...
|
|
|
| |
Motor Encoder Feedback
|
|
Provides continuous output of position, analog or digital.
|
| |
Linear Position Feedback
|
|
Provides continuous output of position, analog or digital.
|
| |
Home / Limit / Position Switches
|
|
Has switched outputs that can limit travel.
|
| |
Integral Brake
|
|
The motor has an integral brake to hold its current position.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary motor features.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Adjustable Stroke
|
|
End points or total stroke length can be adjusted.
|
| |
Air / Oil Tandem
|
|
Cylinder uses an air / oil combination to provide smooth hydraulic-like motion. This combination is only used in pneumatic cylinders.
|
| |
Bumpers / Cushions
|
|
Cushions or bumpers for softening impact at ends of stroke.
|
| |
Closed Loop Control
|
|
This is sometimes called servo control. The cylinder has external devices that feedback a signal to the pump control giving it position information. A type of configuration is to use a servo / proportional valve on the cylinder.
|
| |
Double End Rod
|
|
Rod extends out of both ends of cylinder with attachment features such as threads on both ends.
|
| |
Holding Brake
|
|
Works in conjunction with the self-locking feature to increase holding force.
|
| |
Integrated Overload Slip Clutch / Torque Limiter
|
|
A device used to allow for slip when torque exceeds overload limits.
|
| |
Integral Flow Control
|
|
Integral flow control incorporates a flow control valve or device that limits the amount of air or fluid that enters the cylinder.
|
| |
Integral Sensor
|
|
Cylinder is equipped with an integral sensor to monitor position and/or proximity.
|
| |
Intrinsically Safe
|
|
The cylinder can be used in hazardous environments.
|
| |
Magnetic Switch
|
|
Magnetic switch (Hall effect sensor, reed switch) indicates whether thruster position is in retracted or extended position.
|
| |
Multi-position
|
|
Endplate can be actuated to different positions along its stroke, not just the endpoints.
|
| |
Non-rotating
|
|
Multiple rods or key feature to prevent the plunger from rotating.
|
| |
Protective Boot
|
|
Covers that protect moving parts against environmental damage.
|
| |
Self-locking
|
|
When there is a loss of signal, the device will lock to its current position.
|
| |
Shock Absorbers
|
|
Pneumatic or hydraulic fluid absorption of shock.
|
| |
Thermal Overload Protection
|
|
Motor has a thermal switch which trips when a preset temperature is exceeded.
|
| |
Water Resistant (Sealed)
|
|
Rated to resist moisture which could cause corrosion.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Aluminum
|
|
A bluish silver-white malleable ductile light trivalent metallic element that has good electrical and thermal conductivity, high reflectivity, and resistance to oxidation.
|
| |
Steel
|
|
A commercial iron that contains carbon in any amount up to about 1.7 percent as an essential alloying constituent. It is malleable when under suitable conditions, and is distinguished from cast iron by its malleability and lower carbon content.
|
| |
Stainless Steel
|
|
Stainless steel is chemical and corrosion resistant and can have relatively high pressure ratings.
|
| |
Plastic
|
|
Any of numerous organic, synthetic, or processed materials that are mostly thermoplastic or thermosetting polymers of high molecular weight and that can be made into objects, films, or filaments.
|
| |
Other
|
|
Any plate material not listed above.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Mounting Options
|
|
|
| |
Your choices are...
|
|
|
| |
None
|
|
A cylinder that has no designated method for mounting.
|
| |
Clevis or Eye
|
|
Cylinder is equipped with a clevis or eye attachment, which connects to the extended end of cylinder piston via threads.
|
| |
Double-end Mount
|
|
Nose and rear contain threaded bosses for nut attachment.
|
| |
Flange
|
|
Cylinder is equipped with a mounting flange or bracket.
|
| |
Floating Mount Bracket
|
|
Cylinder is equipped with a floating bracket for more convenient installation.
|
| |
Foot
|
|
Cylinder is equipped with a foot mounting bracket. A foot bracket is a type of flange, which rests underneath the cylinder.
|
| |
Lug
|
|
Lugs are short blocks attached to the side of the cylinder that have holes used to allow mounting to another surface.
|
| |
Face Mount
|
|
Threaded holes on front face for attachment.
|
| |
Nose Mount
|
|
Nose is threaded for mounting through hole with nut on other side.
|
| |
Rear Mount
|
|
Rear has tapped holes or mounting flange.
|
| |
Threaded
|
|
Cylinder is designed to mount to bolts via threaded holes in the cylinder head or cap.
|
| |
Trunnion
|
|
Cylinder is equipped with a trunnion mount. A trunnion is a specially designed mounting block, and can be located at the cap, head, or intermediate location.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary mountings.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
NFPA Mounting?
|
|
Mounting geometry conforms to standards of the National Fluid Power Association (NFPA). Several standard configurations fall under the NFPA designation.
|
| |
Search Logic:
|
|
"Required" and "Must Not Have" criteria limit returned
matches as specified. Products with optional attributes
will be returned for either choice.
|
|
| |
Mount Location:
|
|
|
| |
Your choices are...
|
|
|
| |
Cap
|
|
Mount is located at the cap, also referred to as base or rear, of the cylinder.
|
| |
Head
|
|
Mount is located at the head, also referred to as front or face, of the cylinder.
|
| |
Intermediate
|
|
Mount is located at the intermediate area, or center of the cylinder.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary mounting locations.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Tie-rod
|
|
A cylinder that uses one or more tie-rods to provide additional stability. Tie-rods are typically installed on the outside diameter of the cylinder housing. In many applications, the cylinder tie-rod bears the majority of the applied load.
|
| |
Smooth Body
|
|
Cylinder body encases piston.
|
| |
Pancake
|
|
Shorter length and larger diameter than other styles.
|
| |
Miniature
|
|
A cylinder that operates in the same manner as a regular sized cylinder except its profile is smaller and the body may be threaded for mounting purposes.
|
| |
Multiple Bore
|
|
Two or more bores and pistons combined or stacked in same cylinder.
|
| |
Ram
|
|
A ram is a device in which the cross-sectional area of the piston rod is more than one-half the cross-sectional area of the moving component. Rams are primarily used to push rather than pull, and are most commonly used in high pressure applications.
|
| |
Rectangular
|
|
Cylinder encased in a rectangular "box" shape frame.
|
| |
Rotating
|
|
Air or hydraulic powered rotating cylinders that are well suited to handle a wide range of high performance chucking applications.
|
| |
Welded
|
|
A smooth hydraulic cylinder that uses a heavy-duty welded cylinder housing to provide stability.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary cylinder styles.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
Part Numbers for Air Cylinders
| Part # |
Distributor |
Manufacturer |
Product Category |
Description |
| US8395 |
PLC Radwell |
SMC
|
Not Provided
|
CYLINDER AIR, SPECIAL |
| US4274 |
PLC Radwell |
SMC
|
Not Provided
|
AIR CYLINDER SPECIAL |
| US16773 |
PLC Radwell |
SMC
|
Not Provided
|
CYLINDER, SPECIAL AIR |
| US30280 |
PLC Radwell |
SMC
|
Not Provided
|
CYLINDER AIR, SPECIAL |
| SCA2FA63N750 |
PLC Radwell |
CKD CORP
|
Not Provided
|
AIR CYLINDER |
| US13566 |
PLC Radwell |
SMC
|
Not Provided
|
CYLINDER AIR, SPECIAL |
| US30333 |
PLC Radwell |
SMC
|
Not Provided
|
CYLINDER, AIR SPECIAL |
| 903078 |
PLC Radwell |
BELLOFRAM
|
Not Provided
|
AIR CYLINDER SS SIZE9 RODBP BORE3.4 STROKE3.0 SERF |
| DSO1501080 |
PLC Radwell |
SPECKEN DRUMAG
|
Not Provided
|
AIR CYLINDER SERIES 10/83 |
| GCD212X1 |
PLC Radwell |
COMPACT AIR PROD
|
Not Provided
|
CYLINDER |
More >>
|
