|
|
| |
Blade / Pin Type
|
|
|
| |
Your choices are...
|
|
|
| |
Straight
|
|
Straight (non-locking) plugs or receptacles are inserted at a right angle to the plane of the matching device face.
|
| |
Locking
|
|
Plugs lock into matching connectors. Receptacles lock inserted plugs. In both cases, locking occurs when the plug or receptacle is rotated either clockwise or counter-clockwise.
|
| |
Pin and Sleeve
|
|
Pin and sleeve plugs have round pin contacts. With pin and sleeve receptacles, mating plugs are inserted at a right angle to the plane of the receptacle face.
|
| |
Other
|
|
Other unlisted blade or pin type.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Mounting Style
|
|
|
| |
Your choices are...
|
|
|
| |
DIN Rail Mounted
|
|
Devices mount on a standard DIN rail. DIN is an acronym for Deutsches Institut für Normung (DIN), a German national organization for standardization.
|
| |
Panel Mounted
|
|
Devices fit a depression within a panel so that they are flush or nearly flush with the panel. Typically, these devices are used in applications that require connectors to fit panel cutouts.
|
| |
Flush Mounted
|
|
Devices are installed flush with the surface of a panel or piece of equipment.
|
| |
Wall / Box Mounted
|
|
Devices are threaded for an accessory (backshell) and intended for permanent mounting. They are usually flanged.
|
| |
Flange Mounted
|
|
Devices are equipped with integral flanges for mounting with external hardware such as screws, bolts, or rails. They attach by bolting the flange or riveting it in place through holes in the flange surface. Flange mounted plugs are called flange inlets. Flange mounted receptacles are called flanged outlets.
|
| |
PCB Mounted
|
|
Through hole technology (THT) mounts components on a printed circuit board (PCB) by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a printed circuit board (PCB) by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux. With careful placement, SMT components on solder paste remain in position until elevated temperatures, usually from an infrared oven, melt the paste and solder the component leads to the PCB pads.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary styles.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Configuration
|
|
|
| |
Your choices are...
|
|
|
| |
Single
|
|
Single devices have only one receptacle.
|
| |
Duplex
|
|
Duplex devices have two receptacles in a common housing that mounts as a single unit. Duplex receptacles can accept two plugs.
|
| |
Triplex
|
|
Triplex devices have three receptacles in a common housing that mounts as a single unit. Triplex receptacles can accept three plugs.
|
| |
Quad
|
|
Four-in-one or quad devices have four receptacles in a common housing that mounts as a single unit.
|
| |
Other
|
|
Other unlisted or proprietary configuration.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Applications
|
|
|
| |
Your choices are...
|
|
|
| |
Residential / General-Purpose
|
|
Devices can be used in residential and general-purpose applications.
|
| |
Commercial
|
|
Devices can be used in commercial applications.
|
| |
Industrial
|
|
Devices can be used in general laboratory and industrial applications. Special hardening against weather, shock, extreme heat, and other unusual conditions are not necessary.
|
| |
Hospital
|
|
Devices are designed to meet the demanding performance requirements typically found in health care facilities such as hospitals and clinics.
|
| |
Other
|
|
Other unlisted application types.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Phase
|
|
|
| |
Your choices are...
|
|
|
| |
Single-Phase
|
|
Devices are designed for single-phase systems.
|
| |
Three-Phase
|
|
Devices are designed for three-phase systems.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Voltage Rating
|
|
|
| |
Your choices are...
|
|
|
| |
125 V
|
|
The maximum rating voltage is 125 V.
|
| |
250 V
|
|
The maximum rated voltage is 250 V.
|
| |
277 V
|
|
The maximum rated voltage is 277 V.
|
| |
347 V
|
|
The maximum rated voltage is 347 V.
|
| |
480 V
|
|
The maximum rated voltage is 480 V.
|
| |
600 V
|
|
The maximum rated voltage is 600 V.
|
| |
125/250 V
|
|
This voltage rating is for 3-pole, 4-wire devices.
|
| |
120/208 V
|
|
This voltage rating is for 4-pole, 4-wire and 4-pole, 5-wire devices.
|
| |
277/480 V
|
|
This voltage rating is for 4-pole, 4-wire and 4-pole, 5-wire devices.
|
| |
347/600 V
|
|
This voltage rating is for 4-pole, 5-wire devices.
|
| |
Other
|
|
Other unlisted or proprietary voltage rating.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Current Rating
|
|
|
| |
Your choices are...
|
|
|
| |
15 A
|
|
The maximum rated current is 15 A.
|
| |
16 A
|
|
The maximum rated current is 16 A. This is an international rating.
|
| |
20 A
|
|
The maximum rated current is 20 A.
|
| |
30 A
|
|
The maximum rated current is 30 A.
|
| |
32 A
|
|
The maximum rated current is 32 A. This is an international rating.
|
| |
50 A
|
|
The maximum rated current is 50 A.
|
| |
60 A
|
|
The maximum rated current is 60 A.
|
| |
63 A
|
|
The maximum rated current is 63 A.
|
| |
100 A
|
|
The maximum rated current is 100 A.
|
| |
125 A
|
|
The maximum rated current is 125 A. This is an international rating.
|
| |
Other
|
|
Other unlisted current ratings.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
Proper grounding provides a safe path for electricity to move from a defective outlet, fixture, appliance or tool back into the earth, which is a very good electrical conductor.
|
| |
Your choices are...
|
|
|
| |
Non-Grounding
|
|
Devices do not have a ground terminal.
|
| |
Standard Grounding
|
|
Devices have a standard embedded ground terminal.
|
| |
Isolated Ground
|
|
Devices use a ground path that is isolated from the facility's grounding system. Isolated ground circuits increase the resistance of sensitive electronics to surges. They also provide a clear grounding path to the service panel and help reduce electromagnetic noise that can interfere with equipment operation. With receptacles, the grounding connection is isolated from the mounting strap.
|
| |
Self Grounding
|
|
Self-grounding devices establish a connection to an existing grounding path such as a metal wiring device or metal conduit, gas or water piping, or ducting or structural steel.
|
| |
GFCI
|
|
Ground fault circuit interrupter (GFCI) receptacles include a build-in circuit that detects leakage current to ground on the load side of the device. When leakage current is detected, GFCI interrupts power and prevents hazardous ground fault conditions. GFCI devices conform to UL Standard 943 Class A requirements. National Electric Code NFPA-70 requires their use in a variety or indoor and outdoor locations.
|
| |
Other
|
|
Other unlisted grounding types.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Wires
|
|
|
| |
Your choices are...
|
|
|
| |
1-Wire
|
|
Devices have only one wire.
|
| |
2-Wire
|
|
Devices have two wires.
|
| |
3-Wire
|
|
Devices have three wires.
|
| |
4-Wire
|
|
Devices have four wires.
|
| |
5-Wire
|
|
Devices have five wires.
|
| |
Other
|
|
Other unlisted number of wires.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Poles
|
|
Poles control one path of the circuit. A pole is an output terminal for a switching device (e.g., switch or relay), a combination of mating contacts (normally open, normally closed), or both.
|
| |
Your choices are...
|
|
|
| |
1 Pole
|
|
Devices are unipolar.
|
| |
2 Poles
|
|
Devices have two poles.
|
| |
3 Poles
|
|
Devices have three poles.
|
| |
4 Poles
|
|
Devices have four poles.
|
| |
5 Poles
|
|
Devices have five poles.
|
| |
Other
|
|
Other unlisted number of poles.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Standards and Certifications
|
|
|
| |
Your choices are...
|
|
|
| |
RoHS Compliant
|
|
Restriction of Hazardous Substances (RoHS) is a European Union (EU) directive that requires all manufacturers of electronic and electrical equipment sold in Europe to demonstrate that their products contain only minimal levels of the following hazardous substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl and polybrominated diphenyl ether. RoHS will become effective on July 1, 2006.
|
| |
North American Rated
|
|
Devices meet standards for North American applications.
|
| |
International Rated
|
|
Devices meet standards for international applications.
|
| |
UL Listing Mark
|
|
This Mark, denotes that Underwriters Laboratories Inc. (UL) has found that samples of the product met UL's safety requirements. These requirements are primarily based on UL's published Standards for Safety.
|
| |
CSA Mark
|
|
The CSA Mark may appear alone or with indicators. If it appears alone, it means that the product is certified for the Canadian market, to the applicable Canadian standards. If this Mark appears with the indicator "C and US" or "NRTL/C" it means that the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.
|
| |
NEMA
|
|
Devices follow NEMA configuration standards. The National Electrical Manufacturers Association (NEMA) sets safety standards for electrical cabling and connectors.
|
| |
ANSI
|
|
The American National Standards Institute (ANSI) is a private, non-profit organization (501(c)3) that administers and coordinates the U.S. voluntary standardization and conformity assessment system. The Institute's mission is to enhance both the global competitiveness of U.S. business and the U.S. quality of life by promoting and facilitating voluntary consensus standards and conformity assessment systems, and safeguarding their integrity.
|
| |
NOM
|
|
NOM standards are the official Mexican product safety requirements. Electrical, electronic, medical, wireless and telecom products sold in Mexico must be tested to the national, mandatory NOM standards by an accredited Mexican laboratory. Testing may be conducted by a laboratory outside of Mexico if it has a laboratory-to-laboratory mutual recognition agreement with an accredited Mexican laboratory or by an accredited lab in a country free-trade agreement with Mexico.
|
| |
VDE Component Mark
|
|
The VDE Component Mark indicates conformity with applicable VDE standards.
|
| |
MIL-SPEC
|
|
Devices meet minimum requirements for U.S. military specifications (MIL-SPEC).
|
| |
WEEE Compliant
|
|
“The Waste Electrical and Electronics Equipment Regulations (WEEE Regulations) is a European Parliament Directive with the aim of encouraging reuse, recycling and recovery of electrical and electronic equipment, and to improve the environmental impact and performance of these equipments. This directive sets the requirements and criteria for the collection, treatment, recycling and recovery of these equipments. It makes producers responsible for financing these activities, and retailers and distributors must provide means for consumers to return used or obsolete equipments without charge.
|
| |
Other
|
|
Other unlisted standards.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Features
|
|
|
| |
Your choices are...
|
|
|
| |
Integral Surge Protection
|
|
Devices include integral surge protection against mild to moderate spikes or peaks in electrical supply.
|
| |
Corrosion Resistant
|
|
Corrosion resistant devices are made of special materials and/or plated metal parts that are designed to withstand corrosive environments. Corrosion resistant devices must pass the ASTM B117-13 five-hundred hour Salt Spray (Fog) Test with no visible corrosion.
|
| |
Dust Proof
|
|
Devices are designed so that dust will not interfere with their operation. The IP suitability rating describes the degree of protection that a device offers against the ingress of foreign objects (e.g., IP 20).
|
| |
Locking
|
|
Devices include a locking mechanism.
|
| |
Power Light
|
|
Devices include a power light.
|
| |
Surge Protection
|
|
Devices include surge protection.
|
| |
Tamper Resistant
|
|
Devices are constructed so that access to their energized contacts is limited. Tamper resistant receptacles are required by the National Electric Code NFPA-70 in specific pediatric care areas in health care facilities.
|
| |
Illuminated
|
|
The receptacle is illuminated.
|
| |
Watertight
|
|
Devices are constructed so that water cannot enter under specified test conditions. The IP Suitability Rating designates the degree of protection a device offers against the ingress of moisture and water (e.g., IP-55, IP-44).
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
Part Numbers for Electrical Receptacles
| Part # |
Distributor |
Manufacturer |
Product Category |
Description |
| HBL4750 |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:15A; Voltage, AC:277V; No. of Outlets:2; Connector Mounting:Panel; Mounting Type:Screw RoHS Compliant: Yes |
| HBL7487 |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:15A; No. of Outlets:1; Connector Mounting:Flange RoHS Compliant: Yes |
| IG2340 |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:20A; No. of Outlets:1; Connector Mounting:Panel; Body Material:Nylon; Color:Orange; Voltage Rating:480V RoHS Compliant: Yes |
| IG5362W |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:20A; No. of Outlets:2; Connector Mounting:Panel; Mounting Type:Screw; Voltage Rating:125V RoHS Compliant: Yes |
| IG8200 |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:15A; No. of Outlets:2; Connector Mounting:Panel; Color:Orange; Voltage Rating:125V RoHS Compliant: Yes |
| IG8210 |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:15A; No. of Outlets:1; Connector Mounting:Panel; Color:Orange; Voltage Rating:25V RoHS Compliant: Yes |
| IG8300R |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:20A; No. of Outlets:2; Connector Mounting:Panel; Voltage Rating:125V RoHS Compliant: Yes |
| CR5252IGI |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:15A; No. of Outlets:2; Series:Construction; Connector Mounting:Panel; Mounting Type:Screw; Voltage Rating:125V RoHS Compliant: Yes |
| CR5352IGBK |
Newark |
HUBBELL WIRING DEVICES
|
Power Entry
|
Electrical Outlet Connector; Connector Type:Power Entry; Gender:Receptacle; Current Rating:20A; No. of Outlets:2; Series:Construction; Connector Mounting:Panel; Mounting Type:Screw; Voltage Rating:125V RoHS Compliant: Yes |
More >>
|
