Go to GlobalSpec.com Home
Find:      Advanced >>
Alert   Product Alerts
Keep current on the latest products, new suppliers, and technical articles of interest to you. (See Topics)


Voltage-to-Frequency Converters Specifications

What do you want to do?

Show All Voltage-to-Frequency Converters Companies

Learn more about Voltage-to-Frequency Converters

Search By Specification


Device Specifications




   Analog Input Channels:
 
     This is the maximum number of analog channel inputs. The single-ended number is specified when single-ended inputs are available as twice the number of differential inputs. Differential channels use the difference between two signals as an input; common mode is filtered out. In some systems, differential inputs are combinations of two single-ended inputs. When this is the case, twice the number of differential channels are available as single-ended inputs.
 
   Search Logic:      All matching products will have a value greater than or equal to the specified value.
   Differential Channels
 
     Differential channels have two inputs. The signal to process is the voltage (V) difference between the two inputs. For example, if one reading is 4.93 V and the other reading is 5.16 V, the meaningful value is the 0.23 V difference between the two. Often, this applies to precision measurements where the difference between two low voltage inputs is small but critical.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Maximum Output:
 
     This is the limit of output voltage.
 
   Search Logic:      All matching products will have a value greater than or equal to the specified value.
   Bandwidth:
 
     Bandwidth is the difference between the high and low limits of the frequency response, typically defined by a variation from a nominal value by a stated value such as 3 dB.
 
   Search Logic:      All matching products will have a value greater than or equal to the specified value.
   Accuracy:
 
     Accuracy depends on the signal conditioning linearity, hysteresis, temperature considerations, etc. It is represented here as percent full scale of measurement range.
 
   Search Logic:      All matching products will have a value less than or equal to the specified value.
   Signal Isolator
 
     Signal isolation is the separation of any direct electrical contact of a signal. This can be done in various ways including optical isolation, capacitors, and magnetic induction.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
Signal Inputs




   DC Voltage Input?
 
      
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   AC Voltage Input?
 
      
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
Outputs




   Voltage Output?
 
     Variable voltage output such as 0-10V, ±5V, etc.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Current Output?
 
     Variable current level output such as 0-20mA, 4-20 mA current loop, etc.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Frequency Output?
 
     Output is a frequency or pulse signal such as AM, FM, or PWM monitoring or control.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Timer / Counter Output?
 
     Output is a counting or timing of measured events.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Relay Output?
 
     Switch type output; contacts are open or closed depending on the state of one or more of the inputs.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Resistance / Potentiometer Output?
 
     Output is a variable resistance such as a potentiometer.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Other Output?
 
     Unlisted or specialized output.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
Filter Specifications




   Integral Filter?
 
     A filter will allow certain signal frequencies to pass while attenuating others. Filters can operate on signal phase also.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Programmable Filter?
 
     Filter parameters such as cutoff frequencies may be interactively programmed by user.
 
   Search Logic:      "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
   Low Pass Cutoff Frequency:
 
     Nominal frequency below which input signal is passed and above which the signal is blocked.
 
   Search Logic:      User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
Form Factor




   Form Factor       
   Your choices are...
 
      
 
   Integrated Circuit (IC)
 
     Devices are integrated circuit (IC) chips that mount on printed circuit boards (PCBs).
 
   Printed Circuit Board (PCB)
 
     Devices are printed circuit boards (PCBs) that attach to enclosures or plug directly into computer backplanes.
 
   Panel / Chassis Mount
 
     Devices attach to a panel or bolt onto a chassis.
 
   Modular Bay / Slot System
 
     Devices stack in modular bays or slots and can be interfaced to other units.
 
   Rack Mount
 
     Devices are rack-mounted and fit inside enclosures such as a standard 19” telecommunications rack.
 
   DIN Rail
 
     Devices mount on a standard DIN rail. DIN is an acronym for Deutsches Institut für Normung (DIN), a German national organization for standardization.
 
   Stand Alone
 
     Devices are benchtop or floor-standing units with a full casing or cabinet and an integral interface.
 
   Other
 
     Other unlisted form factors.
 
   Search Logic:      All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
User Interface




   User Interface       
   Your choices are...
 
      
 
   None
 
     No user input or programmability; "black box" style of storage for download or processing elsewhere.
 
   Front Panel & Display
 
     Integral controls, keypad, and/or display on the panel of the unit.
 
   Touch Screen
 
     The device's visual display screen is contact sensitive to allow direct input.
 
   Hand-held / Remote Programmer
 
     Interface unit specifically meant to hold in hand while entering program parameters; may include remote programming.
 
   Computer Programmable
 
     Device is interfaced to a separate supervisory or host computer.
 
   Other
 
     Any unlisted user interface method.
 
   Search Logic:      All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
Part Numbers for Voltage-to-Frequency Converters

Part # Distributor Manufacturer Product Category Description
LM2575S-3.3/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:52kHz; Supply Voltage Min:4V; Package/Case:5-TO-263; Output Current:1A; Output Voltage:37V; Output Voltage, Vout:Adjustable; Peak Reflow Compatible (260 C):Yes; Supply Voltage:40V RoHS Compliant: Yes
LM2576HVS-12/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:52kHz; Package/Case:5-TO-263; Output Current:3A; Output Voltage:12V; Output Voltage, Vout:12 V; Peak Reflow Compatible (260 C):Yes; Supply Voltage Max:60V RoHS Compliant: Yes
LM2576HVS-3.3/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:52kHz; Supply Voltage Min:4V; Package/Case:5-TO-220; Output Current:3A; Output Voltage:37V; Output Voltage, Vout:Adjustable; Peak Reflow Compatible (260 C):Yes; Supply Voltage:60V RoHS Compliant: Yes
LM2587SX-ADJ/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:100kHz; Supply Voltage Min:4V; Package/Case:5-TO-263; Output Current Max:5A; Output Voltage:12.6V; Output Voltage Min:1.23V; Output Voltage, Vout:Adjustable RoHS Compliant: Yes
LM2733YMF/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Output Voltage Max:40V; Switching Frequency Max:1.6MHz; Supply Voltage Min:2.7V; Package/Case:5-TO-263; Leaded Process Compatible:Yes; Output Current Max:1A; Output Voltage Min:3V RoHS Compliant: Yes
LM2595SX-5.0/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:150kHz; Package/Case:5-TO-263; Output Current Max:1A; Output Voltage Min:1.23V; Output Voltage, Vout:5 V; Peak Reflow Compatible (260 C):Yes; Supply Voltage Max:40V RoHS Compliant: Yes
LM2676SX-5.0/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:260kHz; Supply Voltage Min:8V; Package/Case:7-TO-263; Output Current Max:3A; Output Voltage Min:1.23V; Output Voltage, Vout:5 V; Peak Reflow Compatible (260 C):Yes; Supply Voltage Max:40V RoHS Compliant: Yes
UC2577TDKTTT-ADJ Newark Texas Instruments Switching Regulators DC/DC Converter IC; Switching Frequency Max:52kHz; Supply Voltage Min:3V; Package/Case:5-TO-263; Leaded Process Compatible:Yes; Operating Temp. Max:125?C; Operating Temp. Min:-40?C; Output Current:3A; Output Voltage:60V RoHS Compliant: Yes
LM2576S-12/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:52kHz; Supply Voltage Min:4V; Package/Case:5-TO-263; Output Current:3A; Output Voltage:37V; Output Voltage, Vout:Adjustable; Peak Reflow Compatible (260 C):Yes; Supply Voltage:40V RoHS Compliant: Yes
LM2673SX-ADJ/NOPB Newark NATIONAL SEMICONDUCTOR Switching Regulators DC/DC Converter IC; Switching Frequency Max:260kHz; Supply Voltage Min:8V; Package/Case:7-TO-263; Output Current Max:3A; Output Voltage Min:1.23V; Output Voltage, Vout:Adjustable; Peak Reflow Compatible (260 C):Yes RoHS Compliant: Yes

More >>


Find Companies by Name