|
|
| |
Gender
|
|
|
| |
Your choices are...
|
|
|
| |
Male / Plug
|
|
Male connectors or plugs are often referred to as header or free connectors. In coaxial RF connectors, the plug is normally the movable portion and is usually attached to a cable or removable sub-assembly. In shell type multiple-contact connectors, the plug usually contains the socket contacts and is mounted on the "hot" (rack) side of the system. Plugs mate with receptacles, jacks, outlets, etc.
|
| |
Female / Jack
|
|
Female connectors or jacks are connecting devices into which plugs are inserted to make circuit connections.
|
| |
Other
|
|
Other unlisted gender type.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Termination Options
|
|
Terminals are devices designed to terminate a conductor to be affixed usually to a post, stud, chassis, or other conductor or the like in order to establish electrical connection.
|
| |
Your choices are...
|
|
|
| |
Cage Clamp
|
|
Electrical connections are made using a cage clamp.
|
| |
Crimp
|
|
Crimp is the physical compression (deformation) of a contact wire barrel around a conductor to make an electrical and mechanical connection to the conductor.
|
| |
IDC
|
|
Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Electrical connection is made when an insulated conductor is forced into a restrictive slot in the connection part of a contact, during which time the insulation is displaced, and the bare wire engages the sides of the slot. IDC are mass termination connectors for flat cables with contacts that displace the conductor insulation to complete termination. They eliminate the need to strip insulation.
|
| |
PCB Solder / Solder Pin
|
|
In PCB solder or solder pin termination, electrical connection is made by soldering wires or pins onto a printed circuit board (PCB).
|
| |
Screw
|
|
Electrical connections are made using screws.
|
| |
Screw-on or Lugs
|
|
Electrical connections are made using screw-ons or lugs.
|
| |
Solder Cup
|
|
A solder cup is the end of a terminal or contact in which the conductor is inserted prior to being soldered. In solder cup terminations, soldering the connector onto the mounting location makes electrical connection.
|
| |
Tabs
|
|
Electrical connections are made through quick connect tabs.
|
| |
Through Hole / Pin
|
|
Through-hole technology (THT) mounts components on printed circuit boards by inserting component leads through holes in the board and then soldering. In pin termination, components are mounted on PCBs without soldering.
|
| |
Wire Wrap
|
|
Electrical connection is made by using a special tool to wrap a solid stripped or unstripped wire around a terminal post containing a series of sharp edges.
|
| |
Other
|
|
Other unlisted terminal types.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
RoHS Compliant
|
|
Restriction of Hazardous Substances (RoHS) is a European Union (EU) directive that requires all manufacturers of electronic and electrical equipment sold in Europe to demonstrate that their products contain only minimal levels of the following hazardous substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl and polybrominated diphenyl ether. RoHS will become effective on July 1, 2006.
|
| |
Search Logic:
|
|
"Required" and "Must Not Have" criteria limit returned
matches as specified. Products with optional attributes
will be returned for either choice.
|
|
The maximum current or maximum voltage defined by an approval organization may differ from the supplier's maximums. In many cases, the product can be used safely at an unapproved level. Check with the supplier for specific usage details.
|
|
| |
Voltage Rating
|
|
Voltage rating is the maximum operating voltage.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Current Rating
|
|
Current rating is the maximum, recommended, continuous flow of electrical current.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Number of Contacts
|
|
The number of contacts is the number of conductive elements that mate with a corresponding element to provide an electrical path.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Contact Size (AWG):
|
|
An electrical contact is the termination of an electrical wire in the connector's pin or socket. Contact size, also referred to as "Termination Size," is the maximum diameter wire the connector can accommodate.
Wire size is measured according to the American Wire Gauge (AWG) standard. In North America, wire area is measured by the American Wire Gauge (AWG) to indicate conductor size. The AWG is used to measure certain conductors including copper. The higher the AWG number the thinner the wire. This is because AWG stems from a measurement that represented the number of times the copper wire was run through a wire machine that reduced the diameter of the wire. Thus 24-gauge wire went through the machine 6 more times than 18-gauge wire.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
|
|
| |
Features
|
|
|
| |
Your choices are...
|
|
|
| |
EMI or RFI Filter / ESD Shield
|
|
The connector has a filter to eliminate electromagnetic interference (EMI), radio frequency interference (RFI), and/or shielding to prevent electrostatic discharge (ESD) or EMI.
|
| |
Hermetically Sealed
|
|
The connector is hermetically sealed, allowing no internal moisture leakage.
|
| |
Underwater Use
|
|
The connector can be used in underwater applications.
|
| |
Integrated Filter / Magnetics
|
|
The connector has a filter to protect it against unwanted signals, or magnetics to provide filtering, signal conditioning or isolation.
|
| |
Environment Resistant
|
|
The connector can be used in a hazardous chemical environment.
|
| |
Cryogenic Use
|
|
The connector can be used in a cryogenic (subfreezing) environment.
|
| |
Military Connectors
|
|
Military connectors (MIL-SPEC) are shell type connectors built in accordance with military specifications. Their design takes into account the need to protect the connection from environmental factors, allowing them to be used in military and aerospace applications.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Standards / Approvals:
|
|
The maximum current or voltage rating for a product given by an approval organization may be different from the suppliers designed maximums. In many such cases, the product can be used safely at an unapproved level. Check with the supplier for specific usage details.
|
| |
Your choices are...
|
|
|
| |
CEE
|
|
Connector follows CEE configuration standards. CEE is a European standard.
|
| |
CSA Mark (US, C and US, NRTL/C)
|
|
The CSA Mark may appear alone or with indicators. If it appears alone, it means that the product is certified for the Canadian market, to the applicable Canadian standards. If this Mark appears with the indicator "C and US" or "NRTL/C" it means that the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.
|
| |
IEC
|
|
Connector follows IEC configuration standards. IEC is a European standard.
|
| |
NEMA
|
|
Connector follows NEMA configuration standards.
|
| |
UL Listing Mark
|
|
This Mark, denotes that Underwriters Laboratories Inc. (UL) has found that samples of the product met UL's safety requirements. These requirements are primarily based on UL's published Standards for Safety.
|
| |
VDE Component Mark
|
|
For electronic components that meet VDE standards.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
Part Numbers for Heavy Duty Rectangular Connectors
| Part # |
Distributor |
Manufacturer |
Product Category |
Description |
| 09 33 024 2601 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Plug; No. of Contacts:24; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:24B; Contact Gender:Pin; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| 09 16 042 3001 |
Newark |
HARTING
|
Rectangular Power
|
Pectangular Connector; Connector Type:Rectangular Power; Gender:Plug; No. of Contacts:42; Contact Termination:Crimp; Series:Heavy-Duty Han; Connector Shell Size:10B; Contact Gender:Pin; Connector Mounting:Cable RoHS Compliant: Yes |
| 09 20 016 2612 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Plug; No. of Contacts:16; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:16A; Contact Gender:Pin; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| 09 31 006 2601 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Plug; No. of Contacts:6; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:16B; Contact Gender:Pin; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| 09 33 016 2701 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Female; No. of Contacts:16; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:16B; Contact Gender:Pin; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| 09 33 010 2601 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Plug; No. of Contacts:10; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:10B; Contact Gender:Pin; Connector Mounting:Panel RoHS Compliant: Yes |
| 09 20 003 2611 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Plug; No. of Contacts:3; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:3A; Contact Gender:Pin; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| 09 20 003 2711 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Female; No. of Contacts:3; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:3A; Contact Gender:Socket; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| 09 20 016 2812 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Female; No. of Contacts:16; Contact Termination:Screw; Series:Heavy-Duty Han; Connector Shell Size:16A; Contact Gender:Pin; Body Material:Polycarbonate RoHS Compliant: Yes |
| 09 21 025 3101 |
Newark |
HARTING
|
Rectangular Power
|
Rack and Panel Connector; Connector Type:Rectangular Power; Gender:Female; No. of Contacts:25; Contact Termination:Crimp; Series:Heavy-Duty Han; Connector Shell Size:16A; Contact Gender:Pin; Leaded Process Compatible:Yes RoHS Compliant: Yes |
More >>
|
