|
|
| |
Gender
|
|
|
| |
Your choices are...
|
|
|
| |
Male / Plug
|
|
Male connectors or plugs are often referred to as header or free connectors. In coaxial RF connectors, the plug is normally the movable portion and is usually attached to a cable or removable sub-assembly. In shell type multiple-contact connectors, the plug usually contains the socket contacts and is mounted on the "hot" (rack) side of the system. Plugs mate with receptacles, jacks, outlets, etc.
|
| |
Female / Jack
|
|
Female connectors or jacks are connecting devices into which plugs are inserted to make circuit connections.
|
| |
Other
|
|
Other unlisted gender type.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Geometry
|
|
|
| |
Your choices are...
|
|
|
| |
Straight
|
|
The connector does not bend.
|
| |
Right Angle
|
|
The connector is bent at a right angle.
|
| |
Other
|
|
Other unlisted geometry.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Contacts Pitch
|
|
|
| |
Your choices are...
|
|
|
| |
0.50 mm (0.0197'' )
|
|
The contact pitch (distance between pins) is 0.0197'' or 0.5 mm.
|
| |
0.635 mm (0.025'')
|
|
The contact pitch (distance between pins) is 0.025'' or 0.635 mm.
|
| |
1.27 mm (0.05'')
|
|
The contact pitch (distance between pins) 0.05'' or 1.27 mm.
|
| |
1.98 mm (0.078")
|
|
The contact pitch (distance between pins) is 0.078'' or 1.98 mm.
|
| |
2.08 mm (0.08'' )
|
|
The contact pitch (distance between pins) is 0.08'' or 2.08 mm.
|
| |
2.286 mm (0.09")
|
|
The contact pitch (distance between pins) is 0.090'' or 2.286 mm.
|
| |
2.413 mm (0.095")
|
|
The contact pitch (distance between pins) is 0.095'' or 2.413 mm.
|
| |
2.54 mm (0.100")
|
|
The contact pitch (distance between pins) is 0.100'' or 2.54 mm.
|
| |
2.74 mm (0.108")
|
|
The contact pitch (distance between pins) is 0.108'' or 2.74 mm.
|
| |
2.77 mm (0.109")
|
|
The contact pitch (distance between pins) is 0.109'' or 2.77 mm.
|
| |
2.84 mm (0.112")
|
|
The contact pitch (distance between pins) is 0.112'' or 2.84 mm.
|
| |
3.96 mm (0.156")
|
|
The contact pitch (distance between pins) is 0.156'' or 3.96 mm.
|
| |
5.08 mm (0.20")
|
|
The contact pitch (distance between pins) is 0.200'' or 5.08 mm.
|
| |
Other
|
|
Other unlisted contact pitch.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
PC Mount
|
|
Connectors directly attach to the printed circuit board through pre-drilled holes in the board. Soldering permanently attaches connectors to PCB traces.
|
| |
Through Hole / Pin
|
|
Through-hole technology (THT) mounts components on printed circuit boards by inserting component leads through holes in the board and then soldering. In pin termination, components are mounted on PCBs without soldering.
|
| |
Surface Mount (SMT)
|
|
Surface mount technology (SMT) places small components on the surface of a printed circuit board. Soldering permanently attaches connectors to PCB traces. Unlike PC mount connectors, however, SMT connectors do not require drilled holes in the PCB. Using smaller components allows for higher frequencies of operation, smaller board size, etc.
|
| |
Other
|
|
Other unlisted, specialized, or proprietary styles.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Terminal Options
|
|
Terminals are devices designed to terminate a conductor to be affixed usually to a post, stud, chassis, or other conductor or the like in order to establish electrical connection.
|
| |
Your choices are...
|
|
|
| |
Crimp
|
|
Crimp is the physical compression (deformation) of a contact wire barrel around a conductor to make an electrical and mechanical connection to the conductor.
|
| |
IDC
|
|
Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Electrical connection is made when an insulated conductor is forced into a restrictive slot in the connection part of a contact, during which time the insulation is displaced, and the bare wire engages the sides of the slot. IDC are mass termination connectors for flat cables with contacts that displace the conductor insulation to complete termination. They eliminate the need to strip insulation.
|
| |
Solder
|
|
In PCB solder or solder pin termination, electrical connection is made by soldering wires or pins onto a printed circuit board (PCB).
|
| |
Wire Wrap
|
|
Electrical connection is made by using a special tool to wrap a solid stripped or unstripped wire around a terminal post containing a series of sharp edges.
|
| |
Other
|
|
Other unlisted terminal types.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
RoHS Compliant
|
|
Restriction of Hazardous Substances (RoHS) is a European Union (EU) directive that requires all manufacturers of electronic and electrical equipment sold in Europe to demonstrate that their products contain only minimal levels of the following hazardous substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl and polybrominated diphenyl ether. RoHS will become effective on July 1, 2006.
|
| |
Search Logic:
|
|
"Required" and "Must Not Have" criteria limit returned
matches as specified. Products with optional attributes
will be returned for either choice.
|
|
The maximum current or maximum voltage defined by an approval organization may differ from the supplier's maximums. In many cases, the product can be used safely at an unapproved level. Check with the supplier for specific usage details.
|
|
| |
Voltage Rating
|
|
Voltage rating is the maximum operating voltage.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Current Rating
|
|
Current rating is the maximum, recommended, continuous flow of electrical current.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Contact Resistance
|
|
Contact resistance is the measurement of electrical resistance of mated contacts when assembled in a connector under typical service use. Electrical resistance is determined by measuring from the rear of the contact area of one contact to the rear of the contact area of its mate (excluding both crimps) while carrying a specified test current. Overall contact resistance would be the wire-to-wire measurement.
|
| |
Search Logic:
|
|
All matching products will have a value less than or equal to the specified value.
|
|
| |
Insulation Resistance
|
|
Insulation resistance is the electric resistance between two conductors separated by an insulating material.
|
| |
Search Logic:
|
|
All matching products will have a value greater than or equal to the specified value.
|
|
| |
Number of Contacts
|
|
The number of contacts is the number of conductive elements that mate with a corresponding element to provide an electrical path.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
|
|
| |
Operating Temperature
|
|
Operating temperature is the full-required range of ambient operating temperature.
|
| |
Search Logic:
|
|
User may specify either, both, or neither of the limits in a "From - To" range; when both are specified, matching products will cover entire range. Products returned as matches will meet all specified criteria.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Integrated Filter / Magnetics
|
|
The connector has a filter to protect it against unwanted signals, or magnetics to provide filtering, signal conditioning or isolation.
|
| |
Underwater Use
|
|
The connector can be used in underwater applications.
|
| |
Water Resistant Connector
|
|
A connector capable of being used under water permanently.
|
| |
Cryogenic Use
|
|
The connector can be used in a cryogenic (subfreezing) environment.
|
| |
EMI or RFI Filter / ESD Shield
|
|
The connector has a filter to eliminate electromagnetic interference (EMI), radio frequency interference (RFI), and/or shielding to prevent electrostatic discharge (ESD) or EMI.
|
| |
Environment Resistant
|
|
The connector can be used in a hazardous chemical environment.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
Part Numbers for D-subminiature Connectors
| Part # |
Distributor |
Manufacturer |
Product Category |
Description |
| D2F-01FL-D |
Newark |
Omron Electronic Components
|
Contacts
|
Subminiature Basic Switch |
| D25P33E4GX00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:25; D Sub Shell Size:DB; Gender:Plug; Contact Termination:Right Angle Through Hole; Mating Cycles:200; Connector Body Material:Steel RoHS Compliant: Yes |
| D09P24A4GV00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:9; D Sub Shell Size:DE; Gender:Plug; Contact Termination:Through Hole; Mating Cycles:200; Connector Body Material:Steel; Leaded Process Compatible:Yes RoHS Compliant: Yes |
| D09P33E4GV00LF |
Newark |
FCI
|
Standard
|
; Connector Type:D Sub; Series:Delta D; No. of Contacts:9; D Sub Shell Size:DE; Gender:Plug; Contact Termination:Right Angle Through Hole; Mating Cycles:200; Connector Body Material:Steel; Contact Material:Copper Alloy RoHS Compliant: Yes |
| D09S24A4GV00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:9; D Sub Shell Size:DE; Gender:Receptacle; Contact Termination:Through Hole; Mating Cycles:200; Connector Body Material:Steel RoHS Compliant: Yes |
| D15P24A4GV00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:15; D Sub Shell Size:DA; Gender:Plug; Contact Termination:Through Hole; Mating Cycles:200; Connector Body Material:Steel RoHS Compliant: Yes |
| D25P13A4GL00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:25; D Sub Shell Size:DB; Gender:Plug; Contact Termination:Right Angle Through Hole; Mating Cycles:200; Connector Body Material:Steel RoHS Compliant: Yes |
| D25P33E4GV00LF |
Newark |
FCI
|
Standard
|
; Connector Type:D Sub; Series:Delta D; No. of Contacts:25; D Sub Shell Size:DB; Gender:Plug; Contact Termination:Right Angle Through Hole; Mating Cycles:200; Connector Body Material:Steel; Contact Material:Copper Alloy RoHS Compliant: Yes |
| D25S13A4GL00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:25; D Sub Shell Size:DB; Gender:Receptacle; Contact Termination:Right Angle Through Hole; Mating Cycles:200; Connector Body Material:Steel RoHS Compliant: Yes |
| D09S13A4GV00LF |
Newark |
FCI
|
Standard
|
D-Subminiature Connectors ; Connector Type:D Sub; Series:Delta D; No. of Contacts:9; D Sub Shell Size:DE; Gender:Receptacle; Contact Termination:Right Angle Through Hole; Mating Cycles:200; Connector Body Material:Steel RoHS Compliant: Yes |
More >>
|
