Cartridge heaters are used mainly in immersion applications; however, due to their compact cylindrical shape, they can also be used in a variety of other applications. Important parameters to consider when specifying cartridge heaters are maximum operating or sheath temperature, AC voltage required, watts and watt density. Maximum operating temperature is the maximum temperature that the sheath covering the cartridge heater may reach. Note that the maximum sheath temperature is not the hottest temperature that a heated substance may reach. AC voltage is the minimum alternating current (AC) volts required to operate the cartridge heater. Watt density is the amount of wattage per square inch that a cartridge heater can deliver. Suppliers calculate watt density by dividing the available wattage by the heated area. High watt density heaters should not be used with extremely viscous materials, poorly-circulated materials, or explosive/volatile materials due to risk of fire. Important dimensions for cartridge heaters are the nominal diameter and cartridge length or heated length.

Sleeves, jackets or sheaths are used a protective outer covering for heating elements. Typically, cartridge heaters use sleeve materials made of aluminum, brass, copper, iron, nickel alloy, stainless steel, or steel. Heater insulation reduces heat loss to the environment. Some heaters have multiple insulation options. Choice for cartridge heater insulation include: no insulation, ceramic insulation, mica insulation, mineral insulation, and fiberglass. Uninsulated cartridge heaters have a lower profile and are useful in areas where space is at a premium; however, these products are not particularly energy efficient. A cartridge heater equipped with a layer of ceramic insulation can resist heat and chemicals. Ceramics are made of nonmetallic minerals, such as clay, that have been permanently hardened by firing at a high temperature. Mica is known for its high resistance to heat and acids, as well as for its electrical insulating properties.

Cartridge heaters differ in terms of electrical connectors, termination types, mounting styles, and optional features. Not all heaters have termination angles. Straight leads or terminals make straight connections with the cartridge heater. In other words, there is no angle.  Right angle leads or terminals are angled 90 degrees from the initial connection with the cartridge heater.  Termination type represents the electrical connection options available for cartridge heaters.  Most devices can be configured with many different termination options. Choices for termination type include: bare leads, insulated leads, armor cable leads, metal braided leads, flexible conduit leads, screw terminals terminal boxes, quick disconnects and plugs. Cartridge heaters may be mounted or installed using different methods. Some products have multiple mounting options, such as threaded pipe fittings, mounting flanges and locating rings. Features common to cartridge heaters include cooling options, internal temperature detectors, and grounding wires.

More >>

---

---

Cartridge heaters, FIREROD cartridge heaters by Watlow Band & Nozzle Heaters Cartridge Heaters See Watlow Information

Cartridge Heaters 1/4" Diameter Cartridge Heaters ? 1/2" Diameter Cartridge Heaters ? 3/8" Diameter Cartridge Heaters ? 3/4" Diameter Cartridge Heaters ? Heavy Duty See OMEGA Engineering, Inc. Information

Cartridge Heaters:   All Products >> Electric Heaters >> Cartridge Heaters See OMEGA Engineering, Inc. Information

---

---

Home   |   Terms of Use   |   Privacy Policy

©1999-2008 GlobalSpec.  All rights reserved.  GlobalSpec, the GlobalSpec logo, SpecSearch, The Engineering Search Engine and The Engineering
Web are registered trademarks of GlobalSpec, Inc. The Engineering Toolbar and DesignInfo are service marks of GlobalSpec, Inc.
No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used
without the express written permission of GlobalSpec Inc. or TechBriefs as applicable.