Power strips are used in applications where multiple AC outlets are needed, often without surge or line noise protection. Power strips can lie on the ground, or be mounted on a rack, walls, workbenches, etc.  Other mounting types include modular or desktop, monitor shelf, cabinet or cabinet mount, vertical mount, and hardwire mount.  It is important to consider the number of electrical outlets necessary for specific applications.  This number also refers to number of outputs if not in the form of AC outlets.  The outlet can be configured into a number of different styles.  These include NEMA, IEC European standards, CEE European standards, or JIS Japanese standards.

Important electrical specifications to consider when searching for power strips include nominal voltages, frequency, phase, and current rating.  Nominal voltages can be 24 VDC, 48 VDC, 115 VAC, 208 VAC, or 230 VAC.  Frequency can be at 50 Hz, 60 Hz or 400 Hz.  50 Hz is common for European power.  60 Hz is common in North American power.  400 Hz is most widely used in aerospace applications.  Phases can be single or three phase.  Single phase is the standard AC Power for instrument, computers, etc.  Three-phase power is used for industrial power applications such as drive motors, pumps, etc., where power efficiency and higher loads are critical considerations.  Current rating is the rated current for the power strip, typically given for maximum continuous current.  The power rating is the total power rating for the power strip; includes all outlets and circuits.  An important environmental operating parameter to consider is the operating temperature.

Features for power strips generally fall into two categories, protection features and configuration features.  Protection features include circuit breaker, fuse, thermal sensors, EMI / RFI protection, and transient voltage surge suppression.  Circuit breakers are protective devices for overvoltage; circuit breakers trip at overload and may be reset.  Fuses are safety devices that are activated in the event of extended overvoltage; they take the device power off line.  Fuses include replacement types and resettable fuses, often thermal sensing.  Thermal sensors detect high thermal conditions, indicating current overload or other non-design condition.  This may open a fuse or circuit breaker, send an alarm signal, etc.  A device with EMI or RFI protection has filtering and protection to guard against adverse impacts of radio frequency interference (RFI) and electromagnetic interference (EMI).  A power strip with transient voltage surge suppression features clamping or other suppression of transient voltage spikes or other irregularities.  Configuration features include AC adapter spacing, battery backup, twist lock plug, on/off switch, and remote control.  A unit with AC adapter spacing has outlets that are spaced to allow the insertion of multiple AC adapters.  A unit with battery backup has a backup to prevent interruption of power during power supply failure; typically fairly short-term protection is provided.  A twist lock plug is a safety feature to prevent unintended disconnecting or reconnecting.  An on/off switch allows the unit to be plugged in, but not powered.  Remote control units may be controlled via a remote device such as a computer or other switch, either for on/off control, performance monitoring, or control and reading of other parameters.

More >>

---

---

Power Strips, Power Strips Manufacturers, Power Strips... Electrical Electronic Components > Electrical Distribution Equipment > Power Strips - Power Strips - Circuit Breakers - Electrical Insulators

Power Strips Power Strips Advertisers Sponsors Top Articles

Power Cords, Power Strips and Power Adapters Power Cord Reference Power Cords, Power Strips, Plugs and Adapters See Quail Electronics Profile & Catalog

---

---

Home   |   Terms of Use   |   Privacy Policy

©1999-2008 GlobalSpec.  All rights reserved.  GlobalSpec, the GlobalSpec logo, SpecSearch, The Engineering Search Engine and The Engineering
Web are registered trademarks of GlobalSpec, Inc. The Engineering Toolbar and DesignInfo are service marks of GlobalSpec, Inc.
No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used
without the express written permission of GlobalSpec Inc. or TechBriefs as applicable.