Incandescent lamps generate light by passing an electric current through a thin, filament wire until the wire is white-hot. They are used mainly in residential applications because they emit a “warmer” light that contains less red and blue. Incandescent lamps include enclosures (bulbs) made from a ribbon of hot glass that is first thickened and then blown into molds. These glass enclosures are then cooled, cut from the ribbon, and coated with a finishing material. The filament is formed by drawing tungsten metal into a tightly coiled wire. The finished filament is then clamped or welded to leads which are embedded in a glass supporting structure. This structure is then inserted into the bulb and the parts are fused together. When most of the oxygen has been removed, the bulb opening is sealed and a base is attached.

Incandescent lamps use several types of lamp bases. Candelabras and intermediate bases are designed for decorative lighting applications. Miniature candelabras are used in flashlights and instrument panels, typically under 30 V. Single-contact and double-contact candelabras use bayonet connections instead of screw connections as contacts. Medium and three-contact medium lamp bases, some of which are skirted or flared, are typically used in household lamps up to 300 W and in some mercury and sodium lamps below 100 W. Mogul, mogul end prong, and three-contact mogul bases are used in mercury, metal halide, and sodium lamps over 300 W. Lamps requiring more than 200 V are more likely to have a mogul (or larger) base rather than a medium base. Incandescent lamps with a recessed single contact are also available.

Important specifications to consider when searching for incandescent lamps include maximum overall length, light center length, life hours, watts, lumens, and color temperature. Typically, maximum overall length is expressed in inches (in). Light center length is the distance between the center of the filament and the light center length reference plane. Lamp labeling rules from the U.S. Federal Trade Commission (FTC) define light output in lumens (lm), a standard unit of measure for the luminous flux or quality of light. Maximum overall length is usually expressed in inches. Mean lumens specify the average lamp output over a designated amount of time, usually 40% to 50% of the rated lamp life. Color temperature measures the visual “warmth” or “coolness” of the light from incandescent lamps. Higher values are associated with lights that are whiter in appearance.

Selecting incandescent bulbs requires an analysis of filaments, most of which are made of tungsten. Filaments that begin with the letter “C” indicate that the wire was coiled once. Filaments that start with “CC” indicate that the wire was coiled twice. The letters or numbers that follow the “C” or “CC” indicate the position of the filament. C-filament designations include C-1, C-2R, C-2V, C-5, C-7A, C-8, C-9, C-11, C-11V, C-13, C-13D, C-17, C-17A, C-22, and C-130. CC-filament designations include CC-2R, CC-2V, CC-6, CC-8, 2CC-8, CC-11, and CC-13. Other filament configurations for incandescent lamps include BP, FF, M, MP, and SC.

More >>

---

---

Incandescent Lamps on ThomasNet.com Incandescent Gas Lamps Miniature Incandescent Lamps Incandescent Lamp Bases Incandescent Lamp Holders Incandescent Miniature Electric Lamps Lamps

Incandescent Lamps, Incandescent Lamps Manufacturers,... range of lamps such as incandescent lamps, fluorescent tube lamps, energy saving lamps, compact fluorescent lamps, HID lamps, HPMV lamps, HPSV lamps,

NEMA - Large Incandescent Lamps Infrared Lamps Large Incandescent Lamps Miniature and Subminiature Incandescent Lamps See National Electrical Manufacturers Association Information

---

---

Home   |   Terms of Use   |   Privacy Policy

©1999-2008 GlobalSpec.  All rights reserved.  GlobalSpec, the GlobalSpec logo, SpecSearch, The Engineering Search Engine and The Engineering
Web are registered trademarks of GlobalSpec, Inc. The Engineering Toolbar and DesignInfo are service marks of GlobalSpec, Inc.
No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used
without the express written permission of GlobalSpec Inc. or TechBriefs as applicable.