Edge Card Connectors Information on GlobalSpec

Edge card connectors are embedded devices that mate with the edges of single-sided or double-sided printed circuit boards (PCBs) in order to provide an external electrical connection. Industry standards define power specifications such as voltage levels, power pin placements, and power requirements. For example, PICMG 1.0/1.2 standards define the power specifications for peripheral component interconnect (PCI) and industry standard architecture (ISA) buses. The contacts of edge card connectors are made of metal and are plated with a thin, metallic coating that improves conductivity and prevents rust and corrosion. Plating materials include gold, copper, nickel, and silver. Contacts are housed in a termination assembly that is usually made of plastic. Edge card connectors are used widely in personal computers (PCs) and, depending on their components, are suitable for some lead-free applications.

Typically, edge card connectors are available with one or two rows of contacts. Contact pitch, the distance between pins, ranges from as small as 0.0197'' or 0.5 mm to as large as 0.111'' or 2.84 mm. Some edge card connectors are straight. Others are right-angled. A variety of termination options are available. Crimping compresses or deforms a contact wire barrel around a conductor. Wire wrapping requires the use of a special tool to wrap a stripped or unstripped wire around a terminal post that contains a series of sharp edges. Insulation displacement connectors (IDCs) force an insulated conductor into a restrictive slot, slicing through insulation. In PCB solder or solder pin termination, electrical connection is made by soldering wires or pins onto a printed circuit board. With solder cup terminations, soldering the connector onto the mounting location creates an electrical connection. Termination methods also include cage clamps, screws, lugs, and quick-connect tabs.

Performance specifications for edge card connectors include number of contacts, voltage rating, current rating, contact resistance, insulation resistance, dielectric withstanding voltage, and operating temperature. The voltage rating is the maximum operating voltage. The current rating is the maximum recommended continuous flow of electrical current. Contact resistance measures the electrical resistance of mated contacts that are assembled in a connector for typical service use. Insulation resistance is the electric resistance between two conductors separated by an insulating material. Overall contact resistance is a wire-to-wire measurement. Dielectric withstanding voltage is the maximum potential gradient that a dielectric material can withstand without failure. Operating temperature is a full-required range.

Edge card connectors meet the requirements of a variety of national and international standards and approval organizations. Examples include Underwriters Laboratories (UL), the National Electrical Manufacturers’ Association (NEMA), and the International Electrotechnical Commission (IEC). TÜV Rheinland/Berlin-Brandenburg provides international approval services for product safety. The CSA mark indicates compliance with Canadian standards, while the CEE and VDE marks identify conformity with European guidelines. Edge card connectors are also available that meet Japanese industrial standards (JIS).

More >>

Products & Services Related to Edge Card Connectors

Circular Connectors

Circular connectors are multi-pin connectors primarily used for external interfacing.

D-subminiature Connectors

D-subminiature or D-sub connectors are sturdy electrical connectors with a mating face shaped like the letter D. They provide polarization because male and female connectors can fit together in only one way.

DIN Connectors

DIN connectors are high frequency, multi-pin, electrical connectors that meet standards established by Deutsches Institut für Normung (DIN), a German national organization for standardization. The ends of DIN connectors are round, notched, and protected by a metal skirt to ensure that pins line up correctly.

Electrical Connectors

Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.

Fibre Channel Connectors

Fibre Channel connectors are high-speed connectors used in Fibre Channel systems.

Micro Connectors and Nano Connectors

Micro connectors and nano connectors exhibit contact pitches of 0.05'' (micro) and 0.025'' (nano), respectively.

RF and Microwave Connectors

RF and microwave connectors are used to connect the ends of cables in systems that operate in the radio frequency (RF) or microwave spectrum. They include threaded or bayonet-style couplings that snap, screw, or push into place.

Engineering Web: Edge Card Connectors - TechBriefs

Pages: 1 - 3 of 341

Card Edge Connectors ( Card-edge Connectors, PC Card Edge... ALSO CALLED: Card-edge Connectors, PC Card Edge Connectors, PC Card-edge Connectors, and Edge Card Connectors DEFINITION: Devices that connect See TechTarget Information
Card Edge Connectors Card Edge Connectors Extender Card 18 / 36 Contacts Home Page Index Page Computer Accessories Card Edge Connectors See Surplus Sales of Nebraska Information
Card Edge Connectors Manufacturers On B2BChinaSources.Com from... Card Edge Connectors China Card Edge Connectors Manufacturers listings in full models and specifications.

More >>