Hammer Scanner®:
So tough, it can drive nails into a 2x4 ... and still work!

The Hammer Scanner® is a high performance, rugged hand held bar code scanner. The Hammer Scanner® uses linear imaging technology to set a new standard for hand held scanners by combining a bright, sharp aiming line with high resolution imaging to deliver exceptional reading performance.

Solid, Rugged Design - No moving parts inside and solid construction outside deliver years of reliable service in demanding work environments.

FEATURES

Performance

• Illumination: 630 NM Visible Red LED
• Receiving Device: 3648 element linear imager
• Reading Distance: From 1 in. (2.5 cm) to 8 in. (20.3 cm) on medium density codes
• Reading Width: 5 in. (12.7 cm) code width at 7 in. (17.8 cm) distance
• Resolution: 3 mil. at 3.5 in. (8.8 cm) distance
• Skew Angle: +55°
• Pitch Angle: +55@deg;
• Horizontal Velocity: 2 in. (5.1 cm) per second
• Minimum Reflectance Difference: 30%
• Scan Rate: Programmable to 270 scans per second
• Decode Rate: 270 decodes per second

Mechanical/Electrical

• Length: 5.3 in. (13.5 cm)
• Height 6 in. (15.2 cm)
• Width: 3.1 in. (7.9 cm)
• Weight: 6.3 oz. (179.2 g)
• Housing: Polycarbonate/ABS blend, UL 94V0
• Power Requirements: 5Vdc + 10% at scanner

Environmental

• Temperature Operating: +32oF to +122oF (0oC to +50oC)
• Temperature Storage: -4oF to 140oF (-20oC to +60oC)
• Humidity: 0 to 95%
• Mechanical Shock: Operational after 50 drops from 5 ft. (1.53 m) to concrete
• Ambient Illumination: 0 - 70,000 lux
• ESD Protection: Functional after 15kV discharge
• Vibration: Withstands 5G peak from 20 to 300 Hz
• Agency: FCC Class B, CE EMC Class B, CE Low Voltage Directive, IEC60825-1 LED Safety: Class 1, UL, cUL listed, TÜV