10", 12", 14", 16", 18" and 20" WELL SIZES

The Monitor PT Industrial Pitless Unit for Line Shaft Turbine Pumps forms a watertight extension of the well casing which starts below the frostline, where it is buried permanently, and continues upward 12 or more inches above grade, where the pitless case is flanged to receive a motor support and motor. The completed assembly of the motor support and motor closes the Pitless Case making a watertight installation.

FEATURES:

CORROSION PROTECTION. . . All water passages are either hot-dipped lead free galvanized or constructed of corrosion resistant material.

EASY TO SERVICE . . . The inner parts of the pitless unit and the column pipe may be removed without digging up the discharge pipe. The Pitless unit and the pump or well may then be serviced. This easy removal, by lifting, is made possible due to the o-ring seals in the spool. Replacement is equally simple.

RELIABLE SEAL. . . Neoprene O-rings between accurately machined lead free hot-dipped galvanized surfaces on the spool and within the unit provide positive seals.

O-RING SEAL PROTECTION. . . Monitor seal protection prevents seal damage during installation and service.

QUICK TO INSTALL. . . A quality pump installation can be made easily and economically without delay for masonry or building construction.

FROST PROOF. . . No heating is required. All water passages are below the frost line.

PROTECTED SCREEN VENT . . . standard on all units.

SUPPORT RINGS . . . Prevent distortion of the discharge body due to vertical movement of discharge pipe.

TRANSITION SLEEVE FOR MECHANICAL JOINT . . . is available upon request

ACCURATE ALIGNMENT . . .Precision machining assures accurate alignment.

To see detailed drawings, specs and installation guide click on the Product Details weblink on the right